DN 110 guillotine shut-off valve
DN 110 guillotine shut-off valve
General description
Frequently asked questions?
The DN110 Guillotine Shut-Off Valve is an isolation valve designed for SFA Saniflo lifting stations. It allows the wastewater flow to be stopped temporarily so that maintenance and servicing can be carried out safely.
The DN110 valve is designed for use with selected SFA Saniflo lifting stations, particularly the Sanicubic 2 VX range and other compatible wastewater pumping systems using DN110 pipework.
The valve operates using a sliding blade mechanism controlled by a handle. When the blade is lowered, flow is stopped; when raised, wastewater can pass freely through the pipe.
Yes. The valve can be installed as part of a new lifting station installation or added to an existing compatible system to improve maintenance accessibility.
DN110 refers to the nominal pipe diameter of 110 mm, making the valve suitable for DN110 discharge pipework commonly used in sewage and wastewater pumping installations.
A guillotine valve provides a simple and effective method of isolating a pumping station. By shutting off the flow, technicians can perform maintenance, inspections, or pump replacement without draining the entire system.
Yes. The DN110 valve is designed as a permanent component of the discharge pipework and can remain installed throughout the life of the lifting station. It should only be operated when isolation is required.
The valve requires minimal maintenance. It is recommended to periodically inspect the valve for signs of wear, check that the blade moves freely, and ensure that seals remain in good condition.
The DN110 Guillotine Shut-Off Valve is an isolation valve designed for SFA Saniflo lifting stations. It allows the wastewater flow to be stopped temporarily so that maintenance and servicing can be carried out safely.
DN110 refers to the nominal pipe diameter of 110 mm, making the valve suitable for DN110 discharge pipework commonly used in sewage and wastewater pumping installations.
The DN110 valve is designed for use with selected SFA Saniflo lifting stations, particularly the Sanicubic 2 VX range and other compatible wastewater pumping systems using DN110 pipework.
A guillotine valve provides a simple and effective method of isolating a pumping station. By shutting off the flow, technicians can perform maintenance, inspections, or pump replacement without draining the entire system.
The valve operates using a sliding blade mechanism controlled by a handle. When the blade is lowered, flow is stopped; when raised, wastewater can pass freely through the pipe.
Yes. The DN110 valve is designed as a permanent component of the discharge pipework and can remain installed throughout the life of the lifting station. It should only be operated when isolation is required.
Yes. The valve can be installed as part of a new lifting station installation or added to an existing compatible system to improve maintenance accessibility.
The valve requires minimal maintenance. It is recommended to periodically inspect the valve for signs of wear, check that the blade moves freely, and ensure that seals remain in good condition.
Buy with confidence
Experts Since 1958
Creator of the Sanibroyeur macerating toilet.
Tailored Support
Our team of experts is at your service.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity
Technical support
More than 100 certified installers and repair technicians
Made in France
Many products have received the Made in France label