Sanijet 4-50 PC3
Maximum flow rate of 3.6 m³/h and maximum head of 50 m
Presscontrol PC3 for adjusting the switch-on pressure from 1.5 to 3.5 bar
Portability: on/off switch and carrying handle for easy handling.
Motor thermal protection and additional dry-run protection
Hydraulic shock absorber
Product details
Sanijet 4-50 PC3
Materials
Electrical features
Hydraulic
Logistics
General description
Frequently asked questions?
The Sanijet 4-50 PC3 is a self-priming surface jet pump equipped with a PC3 pressure control unit. It is designed for domestic water supply, irrigation, pumping applications, and rainwater use with clean, non-abrasive water.
Yes. The Sanijet 4-50 PC3 is self-priming and can draw water from depths of up to 8 metres, making it suitable for tanks, wells, and rainwater storage systems.
Yes. The integrated pressure gauge and PC3 controller allow users to set the pump activation pressure anywhere between 1.5 bar and 3.5 bar, depending on the installation requirements.
The PC3 Presscontrol automatically starts the pump when water is required and stops it when demand ends. Unlike the PC2 version, it allows the pump start pressure to be adjusted between 1.5 and 3.5 bar
Yes. The PC3 controller provides protection against dry running. If water is unavailable, the pump automatically stops and performs several restart attempts over a 24-hour period.
The main advantage of the PC3 version is its adjustable start pressure (1.5 to 3.5 bar), allowing the user to optimize system pressure for different applications. The PC2 version uses a fixed activation pressure of approximately 2.4 bar.
The Sanijet 4-50 PC3 is a self-priming surface jet pump equipped with a PC3 pressure control unit. It is designed for domestic water supply, irrigation, pumping applications, and rainwater use with clean, non-abrasive water.
The PC3 Presscontrol automatically starts the pump when water is required and stops it when demand ends. Unlike the PC2 version, it allows the pump start pressure to be adjusted between 1.5 and 3.5 bar
Yes. The Sanijet 4-50 PC3 is self-priming and can draw water from depths of up to 8 metres, making it suitable for tanks, wells, and rainwater storage systems.
Yes. The PC3 controller provides protection against dry running. If water is unavailable, the pump automatically stops and performs several restart attempts over a 24-hour period.
Yes. The integrated pressure gauge and PC3 controller allow users to set the pump activation pressure anywhere between 1.5 bar and 3.5 bar, depending on the installation requirements.
The main advantage of the PC3 version is its adjustable start pressure (1.5 to 3.5 bar), allowing the user to optimize system pressure for different applications. The PC2 version uses a fixed activation pressure of approximately 2.4 bar.
Buy with confidence
Experts Since 1958
Creator of the Sanibroyeur macerating toilet.
Tailored Support
Our team of experts is at your service.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity
Technical support
More than 100 certified installers and repair technicians
Made in France
Many products have received the Made in France label