Free Standing Lifting StationsSanicubic 2 Classic
Ambient visual of the Sanicubic 2 Classic, lifting station for grey/waste water installed on the floor in a garage.

Sanicubic 2 Classic

The Sanicubic 2 classic is a robust dual grinder pump that has been designed for the discharge of waste from several bathrooms plus multiple grey water appliances in busy business environments and larger domestic situations.
Above the floor pump (no pit needed)
Pre assembled, plug and play
Backup motor
Wired alarm supplied
Find out more

Product details

The Sanicubic 2 Classic contains two separate, load balanced pumps with high performance grinding systems and will operate alternately. In the event of inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over. Water level is measured by the pressure tube waste water pushes up the level in the tank. When the engagement level is reached, the switch contact closes giving the running order to the circuit board. The circuit board closes the contact of the relay motor, then the pump motor starts working. The pump motor reduces the effluents size by the grinder system, then the effluents are pumped to the main drain. When the level drops, the pressure switch contact opens and this gives the stop order to the circuit board (the stop is delayed and the motor will stop after a few seconds). The circuit board opens the relay motor contact, the motor stops. The return of the effluents evacuated is stopped by the rubber non return valve flap. On the Sanicubic 2 classic the pumps operate alternatively. The two pumps can operate simultaneously in case of alarm only.
Technical specification

Sanicubic 2 Classic

Materials

  • Shaft
  • Tank
  • Pump housing
  • Seal
  • Motor housing
  • Impeller
  • Shaft
  • Shaft
  • Tank
  • Tank
  • Pump housing
  • Pump housing
  • Seal
  • Seal
  • Motor housing
  • Motor housing
  • Impeller
  • Impeller
  • Shaft
  • 1.4021
  • Tank
  • PP
  • Pump housing
  • PP 12 GF
  • Seal
  • NBR
  • Motor housing
  • PA 12 GF
  • Impeller
  • PP GF

Electrical features

  • Number of motor(s)
  • Socket included
  • Voltage (V)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • IP rating
  • Electrical class
  • Motor insulation class
  • Current
  • Length of cable-control box (m)
  • Number of pumps
  • Type of control box
  • Length (m)
  • Section (mm²)
  • Type of cable
  • Number of motor(s)
  • Number of motor(s)
  • Socket included
  • Socket included
  • Voltage (V)
  • Voltage (V)
  • Frequency (Hz)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • Maximum current (A)
  • IP rating
  • IP rating
  • Electrical class
  • Electrical class
  • Motor insulation class
  • Motor insulation class
  • Current
  • Current
  • Length of cable-control box (m)
  • Length of cable-control box (m)
  • Number of pumps
  • Number of pumps
  • Type of control box
  • Type of control box
  • Length (m)
  • Length (m)
  • Section (mm²)
  • Section (mm²)
  • Type of cable
  • Type of cable
  • Number of motor(s)
  • Dual motor
  • Socket included
  • No
  • Voltage (V)
  • 220-240
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 1500
  • Power output P2 (W)
  • 1050
  • Revolution per minute (RPM)
  • 2800
  • Maximum current (A)
  • 13
  • IP rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Single-phase
  • Length of cable-control box (m)
  • 4
  • Number of pumps
  • 2
  • Type of control box
  • Classic
  • Length (m)
  • 2,5
  • Section (mm²)
  • 1.5
  • Type of cable
  • H07 RN-F 3G

Hydraulic

  • Max. Head. (m)
  • Max. flow rate. (m³/h)
  • Number of inlets
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Useable volume (L)
  • ON Level (mm)
  • OFF level (mm)
  • Alarm level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Type of impeller
  • Type of activation
  • Max. Head. (m)
  • Max. Head. (m)
  • Max. flow rate. (m³/h)
  • Max. flow rate. (m³/h)
  • Number of inlets
  • Number of inlets
  • External inlet diameter (mm)
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Total volume (L)
  • Useable volume (L)
  • Useable volume (L)
  • ON Level (mm)
  • ON Level (mm)
  • OFF level (mm)
  • OFF level (mm)
  • Alarm level (mm)
  • Alarm level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Type of impeller
  • Type of impeller
  • Type of activation
  • Type of activation
  • Max. Head. (m)
  • 13
  • Max. flow rate. (m³/h)
  • 15
  • Number of inlets
  • 5
  • External inlet diameter (mm)
  • 110, 40, 50, 100
  • Discharge diameter ext. (mm)
  • 50
  • Ext. ventilation diameter (mm)
  • 50
  • Total volume (L)
  • 45
  • Useable volume (L)
  • 17,5
  • ON Level (mm)
  • 140
  • OFF level (mm)
  • 70
  • Alarm level (mm)
  • 210
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 70 °C
  • Type of impeller
  • Shredding wheel Pro X K2
  • Type of activation
  • Pneumatic

Logistics

  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • 34

General description

  • EAN code
  • EAN code
  • EAN code
  • EAN code
  • 3308815074443
Products

Related products

f4f6kf7dgukzgwh72hjenaeg1mv6icyw.png

Sanicubic carbon filter

g8q57u0qxinfjhttlwnmpbo6c3kpq5ru.png

DN 50 inlet gate valve

FAQs

Frequently asked questions?

  • The Sanicubic 2 Classic is a heavy-duty wastewater lifting station equipped with two grinding pumps. It is designed for residential, commercial, and light industrial applications where wastewater must be pumped to the sewer system.

  • The two pumps operate alternately to balance wear and extend service life. During periods of high inflow, both pumps can run simultaneously. If one pump fails, the other can continue operating until maintenance is performed.

  • The unit provides five inlet connections, including side inlets, offering flexibility when connecting multiple sanitary fixtures and appliances.

  • The Sanicubic 2 Classic is designed for a normal operating temperature of around 35°C and can withstand temperatures up to 70°C for short periods.

  • The unit can receive wastewater from toilets, basins, sinks, showers, bathtubs, bidets, washing machines, and dishwashers, making it suitable for a wide range of installations.

  • The Sanicubic 2 Classic can pump wastewater up to a maximum head of approximately 11 metres and has a maximum flow rate of up to 15 m³/h, depending on the installation conditions.

  • Yes. The motors and level sensors are designed to be easily removable, allowing faster servicing and simplified maintenance procedures.

  • Dual macerating pumps for added reliability, Alternating pump operation for longer service life, High flow rate and pumping capacity, Easy-access maintenance design. Suitable for homes, restaurants, pubs, offices, and small commercial premises

  • The Sanicubic 2 Classic is a heavy-duty wastewater lifting station equipped with two grinding pumps. It is designed for residential, commercial, and light industrial applications where wastewater must be pumped to the sewer system.

  • The unit can receive wastewater from toilets, basins, sinks, showers, bathtubs, bidets, washing machines, and dishwashers, making it suitable for a wide range of installations.

  • The two pumps operate alternately to balance wear and extend service life. During periods of high inflow, both pumps can run simultaneously. If one pump fails, the other can continue operating until maintenance is performed.

  • The Sanicubic 2 Classic can pump wastewater up to a maximum head of approximately 11 metres and has a maximum flow rate of up to 15 m³/h, depending on the installation conditions.

  • The unit provides five inlet connections, including side inlets, offering flexibility when connecting multiple sanitary fixtures and appliances.

  • Yes. The motors and level sensors are designed to be easily removable, allowing faster servicing and simplified maintenance procedures.

  • The Sanicubic 2 Classic is designed for a normal operating temperature of around 35°C and can withstand temperatures up to 70°C for short periods.

  • Dual macerating pumps for added reliability, Alternating pump operation for longer service life, High flow rate and pumping capacity, Easy-access maintenance design. Suitable for homes, restaurants, pubs, offices, and small commercial premises

Related articles

Blog

SANIFLO Provides Solution for Outbuilding Construction Challenge

When the owner of a property in the Durban, Kwazulu-Natal province decided to construct an outbuilding in their back garden to accommodate their parents, they faced a challenge when it came to connecting the new amenities to the existing sewer line. Due to the position of the outbuilding, which was slightly downhill in relation to the main building, there was no gravity fall to the sewer line that served the main building.

Quality

Buy with confidence

  • Experts Since 1958

    Creator of the Sanibroyeur macerating toilet.

  • Tailored Support

    Our team of experts is at your service.

  • Performance and Reliability

    Technologies and materials that ensure efficiency and longevity

  • Technical support

    More than 100 certified installers and repair technicians

  • Made in France

    Many products have received the Made in France label